-₨8,000.00

Audio-Technica ATW-T202 Handheld Microphone Transmitter for Freeway 200 Series Wireless Microphone System

200 Series Freeway: ATW-201 and ATW-202 systems

Audio-Technica’s Freeway 200 Series Wireless System provides proven performance in a variety of settings. Each 200 Series professional VHF wireless system includes a receiver and either a body-pack transmitter or a handheld microphone/transmitter on a specific crystal-controlled frequency. The ATW-R200 receiver design features an innovative docking power supply configuration. An AC power adapter housed in a compartment in the receiver uses an IEC-standard detachable power cordset. Furthering its flexibility, the power adapter may be easily removed from the receiver case, permitting its use as a conventional in-line AC adapter. A novel dipole antenna system on the receiver improves operation by providing a ground element in addition to the usual signal element.

~~₨48,500.00~~ ₨40,500.00

Add to Wishlist

Compare

Description

Product Description

ATW-202 Freeway Handheld Wireless System Specifications:

Overall:

OPERATING FREQUENCY: VHF high band, 169 MHz to 172 MHz
NUMBER OF CHANNELS: Fixed channel
FREQUENCY STABILITY: ±0.005%
MODULATION MODE: FM
MAXIMUM DEVIATION: ±15 kHz
OPERATING RANGE: 200′ minimum
OPERATING TEMPERATURE RANGE: 40 F (4 C) to 110 F (43 C)
FREQUENCY RESPONSE: 80 Hz to 13 kHz

Reciever:

RECEIVING SYSTEM: Non-diversity, single-channel, dual antenna system
IMAGE REJECTION: 50 dB minimum
SIGNAL-TO-NOISE RATIO: 80 dB at 10 kHz deviation (IEC-weighted), maximum modulation 15 kHz
TOTAL HARMONIC DISTORTION: <=1% (10 kHz deviation at 1 kHz)
SENSITIVITY: 20 dBV for 60 dB S/N (IEC-weighted)
AUDIO OUTPUT: 350 mV (1 kHz modulation, 10 kHz deviation, 100 k ohm load)
OUTPUT CONNECTOR: 1/4″ TS (“mono”) phone jack
POWER SUPPLY: 120V AC 60 Hz, 6 VA; or 12V DC, 200 mA, center positive, with external DC supply
DIMENSIONS: 8.27″ (210.0 mm) W x 1.72″ (43.5 mm) H x 4.73″ (120.0 mm) D
NET WEIGHT: 18.9 oz (536 g); without AC adapter, 11.9 oz (336 g)
ACCESSORIES INCLUDED: AD1202A 120V docking AC adapter; 120V AC IEC cordset

Handheld Transmitter:

RF POWER OUTPUT: 10 mW High position, 2 mW Low position, typical
SPURIOUS EMISSIONS: Under federal regulations
DYNAMIC RANGE: >=90 dB, A-weighted
MICROPHONE ELEMENT: Dynamic unidirectional
BATTERY: 9V (NEDA type 1604) alkaline, not included
CURRENT CONSUMPTION: 30 mA typical
BATTERY LIFE: Approximately 15 hours in High position; Approximately 20 hours in Low position (depending on battery type and use pattern)
DIMENSIONS: 9.50″ (241.3 mm) long, 2.10″ (53.3 mm) diameter
NET WEIGHT: 12.7 oz (360 g)
ACCESSORY INCLUDED: AT8456a Quiet-Flex stand clamp